Transportation equipment company

 


Pneumatic Air Motors and Torque Multipliers 

 

 T22020 Pneumatic Air Motor 
    - 380 to 1250 Foot-Pound torque range
    - 1" Square drive
    - Single speed forward and reverse operation
    - Low operator fatigue - quiet, non impacting or pulsing
    - Repeatability of +/- 5%

 

 This air motor is currently used in the kits listed below.  If you are looking to address a different torquing application, custom reaction brackets and kits can be designed and manufactured to suit your specific needs.  Please Contact Us to discuss your application.

   T22040 Pneumatic Barring Over Tool With Remote for GE FDL Engines

 T55910 Pneumatic Barring Over Tool With Remote - EMD Engines
  

 

T16050 Pneumatic Air Motor
    - 650 to 2500 Foot-Pound torque range
    - 1" Square drive
    - Single speed forward and reverse operation
    - Low operator fatigue - quiet, non impacting or pulsing
    - Repeatability of +/- 5%

 

 This air motor is currently used in the kits listed below.  If you are looking to address a different torquing application, custom reaction brackets and kits can be designed and manufactured to suit your specific needs.  Please Contact Us to discuss your application.

  T15681 Kit For GE FDL Cylinder Hold Down Bolts

 T86770 GEVO Pneumatic Barring Over Tool With Remote Control

       T16050EVO - GEVO Engine Barring Over Tool 

  T24101 Kit for Cylinder Hold Down Bolts - GE FDL Engines


T16051 Pneumatic Air Motor
    - 650 to 2500 Foot-Pound torque range
    - 1 1/2" Square drive
    - Single speed forward and reverse operation
    - Low operator fatigue - quiet, non impacting or pulsing
    - Repeatability of +/- 5% 

 

 This air motor is currently used in the kits listed below.  If you are looking to address a different torquing application, custom reaction brackets and kits can be designed and manufactured to suit your specific needs.  Please Contact Us to discuss your application.

  T50031 EMD Pneumatic Torque Kit for Cylinder Crab Nuts

       T50071 Heavy Duty Kit for Removing GE Cylinder Hold Down Bolts 

 

 

 

PT2000 Pneumatic Air Motor
- Square Drive Size: 1"
- 300-1450 Ft-lb torque range
- Switchable forward and reverse operation.
- Quiet - less than 81 dB(A), and non impacting for low operator fatigue.
- 'Soft Start' trigger control aids socket location and allows gradual and safe reaction take up.
- For safety, gearbox can turn independently from handle. Torque reaction is never transmitted back to the    operator.
- All torques can be achieved at less than 6 bar (90 psi).

 

 This air motor is currently used in the kits listed below.  If you are looking to address a different torquing application, custom reaction brackets and kits can be designed and manufactured to suit your specific needs.  Please Contact Us to discuss your application.

  T58300 - Gear Case Pneumatic Torque Kit for GE AG and AH Traction Motors

       T58080 - Cam Car Bolt Pneumatic Installation / Removal Kit - GE AC Traction Motors 

 T58890 - Traction Motor Axle Cap Pneumatic Torque kit for EMD Motors

 T81051 - Pneumatic Torque Kit for Main Bearing Side Bolts - for A/C 6000 and GEVO Engines

 

 

PT1000 Pneumatic Air Motor
- Square Drive Size: 3/4"
- 140-740 Ft-lb torque range
- Switchable forward and reverse operation.
- Quiet - less than 81 dB(A), and non impacting for low operator fatigue.
- 'Soft Start' trigger control aids socket location and allows gradual and safe reaction take up.
- For safety, gearbox can turn independently from handle. Torque reaction is never transmitted back to the    operator.
- All torques can be achieved at less than 6 bar (90 psi).

 

 This air motor is currently used in the kits listed below.  If you are looking to address a different torquing application, custom reaction brackets and kits can be designed and manufactured to suit your specific needs.  Please Contact Us to discuss your application.

 T59660 - Crab Nut Torque Kit for EMD Engines (Will Break Loose @ 3500 Ft-Lbs and Install @ 2400 Ft-Lbs


       Torque Verifiers  

- True torque multiplication guaranteed better than +/-4%.
- High ratios allow the use of a small torque wrench, multipliers can be used where access is limited.
- Anti Wind-Up Ratchet available
- A variety of reaction styles are available for maximum versatility.

 

  Input Output  Multiplication Ratio  Operating Torque Range  Used in the Following Kits 
T16500  3/4" Square  1" Square   5:1                 250-2500 Ft-Lbs  T15681 - Torque Kit for GE FDL Power Assembly Bolts
T85712V 1/2" Square  1" Square  25:1 145-1450 Ft-Lbs  T85712 -GEVO Conn Rod Torque Kit  and T86430LB - GEVO Rocker Arm Torque Tool
T23600 1/2" Square  1" Square   25:1         100-2500 Ft-Lbs      T23610 - GE FDL Manual Torque Kit for Power Assembly Bolts  and T24101 Pneumatic GE FDL Power Assembly Bolt Kit
T23601 1/2" Square  1 1/2" Square   25:1 250-2500 Ft-Lbs   T54101 - EMD Manual Crab Nut Torque Kit
T55210  3/4" Square  1" Square   5:1  125-1250 Ft-Lbs  T52210K - GE Traction Motor Axle Cap Torque Kit