T18500 - Dry Abrasive Blast Cleaning Machine


This blast machine is used to clean carbon, varnish, rust or other buildup from engine components. Compressed air to the blast nozzle is controlled by a switch activated by the operators elbow. An air pressure regulator is provided to adjust blast intensity. A dust collection system is provided by with a slip out tray for removal of debris. Glass bead media is used where components are to be cleaned without affecting their critical dimensions

Height 95" Depth 66" Width 50"

Domestic Voltage: 230V 3PH 60CY for blower motor
115V 1PH 60CY for control circuit

Export Voltage: 230V 3PH 50CY for blower motor
230V 1PH 50CY for control circuit

NOTE: AT 80PSI, approximately 85 CFM of air is
required to power this machine. This demand can
be supplied by a 20hp air compressor minimum for
constant duty operation.